Nanozyme Database

	ref	material	size	size err	size unit	size type	size comment	BET	b _nanozyme	b 10ⁿ	b unit	specific act	sa 10ⁿ	sa unit	comment
8151	1084	CuMnFe-ATP	5-10		nm	TEM	The specific surface area and pore-size distribution of CuMnFe-ATP were calculated based on nitrogen adsorption–desorption results. As Fig. 3C shows, the CuMnFe-ATP NPs exhibited a type IV isotherm, which possessed significant hysteresis at the range of 0.4–1.0 P/P0. The surface area was calculated as 37.31 m2 g− 1 , according to the Brunauer-EmmettTeller model. The large surface area may be induced by the collapse of the CuMnFe-ATP NP structures after drying in vacuum. From Fig. 3D, although the pore-size distribution of CuMnFe-ATP NPs was majorly in the range of 5–10 nm, some pore sizes were about 27.5 nm. The generation of larger pores suggests the collapse of the CuFeMn-ATP NPs. Also, the SEM micrograph indicates the existence of large pores in the CuMnFe-ATP NPs, which also proves the structure collapse.	37.31

	ref	material	enzyme type	substrate	pH	T	k_m	k_m err	k_m 10ⁿ	k_m unit	v_max	v_max err	v_max 10ⁿ	v_max unit	k_cat	k_cat err	k_cat 10ⁿ	k_cat unit	k_cat/k_m	k_cat/k_m 10ⁿ	k_cat/k_m unit	comment
7053	1084	CuMnFe-ATP	POD	TMB			0.046			mM	4.31		-8	M/s					1084			1084
7052	1084	CuMnFe-ATP	POD	H2O2			0.14			mM	5.83		-8	M/s					1084			1084

	ref	material	application	target	method	linear range	linear ran unit	LOD	lod unit	recovery	comment
5996	1084	CuMnFe-ATP	detecct H2O2	H2O2	Color	0.5− 100.0	μM/L	0.047	μM/L	99.7-103.0%

	ref	title	DOI	material type	comment
4271	1084	Regulating the Enzymatic Activities of Metal-ATP Nanoparticles by Metal Doping and Their Application for H2O2 Detection	https://doi.org/10.1016/j.snb.2021.129671	MOF	metal-ATP nanoparticles