Nanozyme Database

	ref	material	size	size err	size unit	size type	size comment	BET	b _nanozyme	b 10ⁿ	b unit	specific act	sa 10ⁿ	sa unit	comment
8001	790	FePOs			nm	DLS	The average hydrodynamic diameter (Dh) of FePOs measured by DLS was approximately 420 ∼ 430 nm
8076	881	FePOs	420~430		nm	DLS	FePOs measured by DLS was approximately 420∼430 nm

	ref	material	enzyme type	substrate	pH	T	k_m	k_m err	k_m 10ⁿ	k_m unit	v_max	v_max err	v_max 10ⁿ	v_max unit	k_cat	k_cat err	k_cat 10ⁿ	k_cat unit	k_cat/k_m	k_cat/k_m 10ⁿ	k_cat/k_m unit	comment
6786	881	FePOs	POD	TMB		RT													881
6781	881	FePOs	OXD	TMB			0.72	0.25		mM	0.85	0.19		mM/min					881

	ref	material	application	target	method	linear range	linear ran unit	LOD	lod unit	recovery	comment
5807	881	FePOs	anti-tumor protocol
5716	790	FePOs	anti-tumor efficiency

	ref	title	DOI	material type	comment
3976	790	Trienzyme-like iron phosphates-based (FePOs) nanozyme for enhanced anti-tumor efficiency with minimal side effects	https://doi.org/10.1016/j.cej.2020.125574	Others	Trienzyme-like iron phosphates-based (FePOs)
4067	881	Trienzyme-like iron phosphates-based (FePOs) nanozyme for enhanced anti-tumor efficiency with minimal side effects	https://doi.org/10.1016/j.cej.2020.125574	Metal	FePOs nanozyme was prepared via a simple hydrothermal method. In a typical process, H2NCONH2 (6.0 g) and sodium lauryl sulfate (SDS, 0.5 g) were dissolved in deionized water (84 mL) and then magnetically stirred for 10 min to obtain a homogeneous solution. Afterwards, Fe2(SO4)3 (0.2 g) and phosphoric acid (20% wt H3PO4, 0.490 g) were separately dissolved in deionized water (8 mL), and then added dropwise to the above solution, which was then magnetically stirred for 20 min. Next, the mixture was transferred into a 150-mL Teflon-lined autoclave, sealed and maintained at 140 °C for 2 h, and then cooled to room temperature naturally. The obtained product was collected by centrifugation, washed with deionized water and ethanol, and finally dried in a vacuum at 60 °C.