Nanozyme Database

	ref	material	size	size err	size unit	size type	size comment	BET	b _nanozyme	b 10ⁿ	b unit	specific act	sa 10ⁿ	sa unit	comment
7486	200	GeO2					showed besom-like morphology with uniform size (width of ≈100 nm and length of ≈1 µm). the “head of besom” was composed of long strip with width of ≈10 nm (Figure 1c,d).

	ref	material	enzyme type	substrate	pH	T	k_m	k_m err	k_m 10ⁿ	k_m unit	v_max	v_max err	v_max 10ⁿ	v_max unit	k_cat	k_cat err	k_cat 10ⁿ	k_cat unit	k_cat/k_m	k_cat/k_m 10ⁿ	k_cat/k_m unit	comment
6097	200	GeO2	POD	H2O2			1.75			mM	23.400		-8	M/s					200			200
6096	200	GeO2	POD	TMB			0.42			mM	23.397		-8	M/s					200

	ref	material	application	target	method	linear range	linear ran unit	LOD	lod unit	recovery	comment
5111	200	GeO2	Colorimetric Assay of OPs	paraoxon	Color	0.1-50	pM	14	fM
5110	200	GeO2	Colorimetric Assay of OPs	paraoxon	Color	0.1-50	pM	14	fM		Typically, 100 µL of different concentrations of paraoxon (0, 0.1, 2, 5, 10, 15, 30, 50, 70, 100 pm) were mixed with 20 µL of PB solutions (0.1 m, pH 8.0) containing AChE (10 µg mL−1). After the incubation for 20 min at 37 °C, 20 µL of ATCh solution (10 mm) and 20 µL of GeO2 nanozymes solution (1 mg mL−1) were added into the above mixture respectively for another 20 min incubation. The residual GeO2 nanozymes was collected by centrifugation, and added into 200 µL of acetate buffer (pH 4.0, 0.1 m) containing TMB (0.6 mm) and H2O2 (1.2 mm). Finally, the absorbance of the above reaction was measured after 30 min. Each experiment was repeated three times. The LOD was calculated by the equation LOD = (3σ/s), where σ is the standard deviation of blank signals and s is the slope of the calibration curve.

	ref	title	DOI	material type	comment
3431	200	White Peroxidase‐Mimicking Nanozymes: Colorimetric Pesticide Assay without Interferences of O2 and Color	https://doi.org/10.1002/adfm.202001933	Metal oxide	GeO2