Periodic

Materials
  • ALL
  • Enzyme-like Activity
  • ALL
  • MOF
    ref material size size err size unit size type size_comment BET b nanozyme b 10n b unit specific act sa 10n sa unit comment
    7343 12 CeO2@ZIF-8 NPs 275 nm TEM the average 651.2260
    7369 56 MOF-546(Fe) SEM a length of about 1–2 μm and a diameter of about 0.5–1 μm μmol/min 6 -2 μmol glucose/(mg GOx·min)
    7401 98 Tb-OBBA-Hemin 200-1500 nm SEM As shown in Figure 1a, the as-prepared Tb-OBBA-Hemin has spherical particles with a size of 200 nm to 1.5 μm 21.38
    7403 103 CeO2NRs-MOF 120 nm TEM the length of the prepared CeO2NRs is about 120 nm
    7404 105 AU-1
    7406 108 HP-MIL-88B-BA 
    7411 113 PB
    7416 119 ZIF-67 400 nm SEM 1833.26 m2/g
    7429 137 Zr-MOF 60 nm SEM As demonstrated by Fig. 1C, the synthesized Zr-MOF presents a uniform spherical morphology, and the diameter is ∼60 nm. 217.5
    7441 151 Hf-DBP-Fe 82.1 2.1 nm DLS Dynamic light scattering (DLS) showed similar number-averaged sizes of 82.1 ± 2.1 for Hf-DBP-Fe and 81.6 ± 3.6 nm for Hf-DBP (Fig. 2d).
    7456 164 PBNPs in TiNM SEM the TiNM was composed of parallel nanochannels, and these nanochannels have conical shape with an average diameter of a large base entrance of -200 nm and small tip entrance of -50 nm
    7460 168 MIL-101(Fe) 500 nm SEM SEM images showed that MIL-101(Fe) had the well-defined octahedral morphology with an average diagonal length of approximately 500 nm 2702.9
    7469 179 PMOF(Fe) 300 nm SEM The low-magnification SEM images revealed that PMOF(Fe) was of uniform ellipsoidal shape with an average diameter of 300 nm (Figure 1A). TEM images in Figure 1B further show the morphology and size of PMOF(Fe), which was consistent with the result of SEM. After modifying the Pt NPs on the surface of PMOF(Fe), Pt@PMOF(Fe) kept the morphology of PMOF(Fe) (Figure 1C) and with a lot of Pt NPs. The size of Pt NPs is around 2 nm (Figure 1D, inset). These Pt NPs were modified on the surface of PMOF(Fe) uniformly.
    7504 224 oxidized UiO-66(Ce/Zr) Correspondingly, the strong adsorption of Pi onto oxidized UiO-66(Ce/Zr) decreases the specific surface area and pore size of the latter
    7509 231 HKUST-1 85 nm TEM And the obtained HKUST-1 with blue color shows a regular sphere morphology with the average particle size of ∼85 nm in TEM imaging (Figure 1a) and a larger value of 140 nm in the DLS dispersed in water (Figure 1b).
    7556 313 Fe-Loaded MOF-545(Fe) 3.7 nm SEM The SEM results showed that the crystal (Fe-loaded MOF-545(Fe)) exhibited a rod-like morphology in size (3.7 nm) with hexagonal edge, which was the same as the published results 2368
    7557 314 Fe-MOF 500-700 nm SEM FE-SEM images in Fig. S1A&B show that Fe-MOFs (Fig. S1A) and Zr-MOFs (Fig. S1B) are in octahedral crystal shape with around 500–700 nm and 100–300 nm diameter, respectively, while Cu-MOFs (Fig. S1C) is in spherical shape with a size of 400–700 nm diameter.
    7558 316 Fe-MIL-88B 270 nm TEM MIL-88 with an average diameter of 270 nm was synthesized by the hydrothermal method 13.40 m2 ·g−1.
    7571 331 Fe-MOFs 100 nm TEM Diameter
    7572 331 Fe-MOFs 185 nm TEM length
    7585 345 MIL-53 (Fe) less than 250 nm nm SEM
    7586 346 MoS2/rGO 5 μm SEM thickness
    7592 350 AuNP@Fe-TCPP-MOF 1.1 μm SEM
    7648 414 PBA NCs 60 nm TEM 60.12
    7651 419 Hollow MnFeO oxide 241.291
    7698 464 FePorMOFs 150 nm SEM The SEM image showed the as prepared FePorMOFs were uniform in a rod-like structure with a 600 nm length and 150 nm width (Figure 3B).
    7703 470 Tα-MOF 65 nm TEM These results are consistent with the data obtained from TEM image. Homogeneous size distribution and an average size of 65 nm observed in Fig. 2b.
    7775 546 NH2-MIL-101(Fe) 12
    7776 546 MIL-101(Fe) 600-800 nm TEM 5
    7777 546 NO2-MIL-101(Fe) 36
    7786 556 UiO-66 200-300 nm SEM Figure 3. Scanning electron microscopy (SEM) images of the as-synthesized UiO-66 MOFs (particle size is around 200−300 nm for all the samples). 861
    7805 577 Zn-TCPP(Fe) TEM And the TEM image in Figure S1b clearly reveals the 2D Zn-TCPP(Fe) MOF with well-defined ultrathin sheet-like structures.
    7831 605 Ce-MOF
    7837 613 NH2-MIL-53(Fe) 300-500 nm SEM The average size is approximately 300–500 nm
    7850 628 MIL-100 60 nm SEM 538.2
    7855 635 NEQC-340 70-200 nm TEM 112
    7904 690 Cu2+-NMOFs 350 nm SEM The Cu2+-NMOFs are in a good crystal morphology with a uniform size of around 350 nm
    7929 719 Fe-BTC SEM The size of Fe-BTC was about 2.6 μm × 2.1 μm (length × width
    7930 719 Fe-BTC 77 nm AFM AFM characterization shows that the average thickness of the 2D Fe-BTC nanosheets was about 77 nm
    7936 726 NH2-MIL-88B(Fe)-Ag ~300 nm SEM As shown in Figure 1B, the SEM revealed that NH2-MIL-88B(Fe)-Ag was produced with the morphology of fusiform and length of ∼300 nm, identical to that of NH2- MIL-88B(Fe) in Figure 1A.
    7982 776 Ti8-Cu2 μm SEM Transmission electron microscopy (TEM) and scanning electron microscope (SEM) indicated that Ti8-Cu2 maintained the disk-like morphology of Ti8-OH of ∼1 μm in diameter and ∼0.4 μm in thickness 1245
    8025 825 Cu-hemin-MOF 6 μm SEM As shown in Fig. 2a, Cu-hemin-MOF presents 3D ball-flower shape with the dimension of about 6 μm.
    8046 850 PCN-222(Mn) 2217
    8059 864 2D Cu-TCPP nanofilm μm TEM, SEM
    8066 871 Cu-MOF TEM, SEM The morphology of prepared Cu-MOF NPs was characterized by TEMand SEManalysis. As displayed in Fig. 2a, b, the Cu- MOF NPs have a spherical shape with uniform particle distribution.
    8072 877 ZIF-67/Cu0.76Co2.24O4 NSs 100 to 250 nm TEM SEM and TEM images are shown in Figure 1B,C with the size range of about 100−250 nm
    8091 899 hemin@UiO-66-NH2 100―190 nm TEM Fig.2 SEM(A, B) and TEM images(C, D) of UiO-66- NH2(A, C) and hemin@UiO-66-NH2(B, D)
    8107 915 UiO-66(Fe/Zr)-NH2 2.0-3.0 μm SEM
    8110 918 Prussian blue (PB)
    8122 1059 MAF-5-CoII NS 1155
    8151 1084 CuMnFe-ATP 5-10 nm TEM The specific surface area and pore-size distribution of CuMnFe-ATP were calculated based on nitrogen adsorption–desorption results. As Fig. 3C shows, the CuMnFe-ATP NPs exhibited a type IV isotherm, which possessed significant hysteresis at the range of 0.4–1.0 P/P0. The surface area was calculated as 37.31 m2 g− 1 , according to the Brunauer-EmmettTeller model. The large surface area may be induced by the collapse of the CuMnFe-ATP NP structures after drying in vacuum. From Fig. 3D, although the pore-size distribution of CuMnFe-ATP NPs was majorly in the range of 5–10 nm, some pore sizes were about 27.5 nm. The generation of larger pores suggests the collapse of the CuFeMn-ATP NPs. Also, the SEM micrograph indicates the existence of large pores in the CuMnFe-ATP NPs, which also proves the structure collapse. 37.31
    8168 1106 UCZN 120 nm SEM The SEM (Figure 1(b)) and TEM (Figure 1(c, d)) imagesdemonstrated that UCZN exhibited a uniform size of ap-proximately 120 nm
    8184 1121 CPMP 330 nm TEM It can be seen from Figure S3, Supporting Information, that 9.5% CPMP had an average particle size of about 330 nm with good dispersity (the polydispersity index of 9.5% CPMP in water and phosphate buffer solution [PBS], as well as cell medium is 0.221, 0.213, and 0.116, respectively), which is suitable for biological applications and can achieve good therapeutic results.
    8185 1122 V-POD-M 1.43 nm TEM To simplify the calculation model, we first create a penetration simulation model using the cytomembrane surrounded by H2O molecules and nanostructures with a flat surface (size: 12.53 nm ×12.53 nm) and epitaxial nanotubes-based spiky surface (diameter: 1.43 nm), respectively.
    8192 1133 NH2-MIL-101(Fe) 1 μm SEM the prepared NH2-MIL-101(Fe) has a relatively uniform spindle-shaped shape with a length of several micrometers and a width of about 1 μm
    8204 1157 MOF-199 110 nm TEM the average diameter was approximately 110 nm with a narrow size distribution and highly crystalline morphology. 1674.3
    8223 1179 CeOx@fMIL 112 nm DLS After coating with MIL, the dynamic light scattering (DLS) of CeOx indicated an increase in the mean hydrodynamic diameter particle size from 17 to 112 nm.
    8224 1182 Az@MOF Scanning electron microscopy (SEM) imaging indicated the extremely homogeneous morphology with a length of 200 nm and a width of 75 nm (Fig. 1a). Furthermore, transmission electron microscopy (TEM) images of Mn-MOFs in Fig. 1b directly displayed a pore size of 1.25 nm, which is in accordance with the result of N2 adsorption–desorption (1.25 nm) in Fig. S7.† The pore size of 1.25 nm permitted the encapsulation and release of AcManNAz (MW = 430).
    8228 1187 Ag-PBA 225 25 nm SEM Scanning electron microscopy (SEM) images (Fig. 2) of Ag-PBAs and PBAs showed essentially the same cubic morphology, with a diameter of 200–250 nm, confirming the successful synthesis of Ag-PBA nanoparticles that retained a cubic crystalline structure and a similar size to PBA.
    8236 1203 Cu-MOGs
    8253 1229 MIL-53(Fe)
    8276 1261 GOx@Fe-ZIF-8 91-633 SEM The scanning electron microscopy (SEM) images (Figure S3A) showed that when the ratio was between 1:0.25 and 1:2, the Fe-ZIF-8 nanoparticles all grew into a typical ZIF-8-like rhombohedron dodecahedron morphology with the average particle size from 91 to 633 nm (Figure S3B)
    8278 1263 USPBNPs 3.4 nm TEM Transmission electron microscopy (TEM) image (Figure 1a) shows that when the ethanol concentration was 75% in volume, USPBNPs with sizes of about 3.4 nm were obtained (Figure 1b) 466 U/mg
    8299 1289 GOx@CuBDC 221 nm SEM Average
    8331 1324 PBBA 45 nm SEM
    8336 1328 Fe-MIL-88NH2 nanozyme 1~2 μm SEM length
    8337 1328 Fe-MIL-88NH2 nanozyme 0.1~3 μm SEM width
    8341 1334 MIL-101(Fe)@Fe3O4 243 nm TEM the nanoparticles are spherical with a diameter of ~ 243 nm. The shell thickness of the MOF layer was approximately 25 nm. 726.8
    8342 1334 Fe3O4 25.8
    8343 1336 Eu-pydc 1~2 μm SEM the MOF shows regular particles with a size of about 1–2 μm which depended on the regulation of the new method
    8350 1346 Cu-MOF 90 10 nm TEM Uniform octahedral crystalline structures with average particle sizes about 80–100 nm were observed according to the SEM and TEM images.
    8351 1346 Cu-MOF 90 10 nm SEM Uniform octahedral crystalline structures with average particle sizes about 80–100 nm were observed according to the SEM and TEM images.
    8418 1408 Cu-MOF(3) 220 nm DLS hydrodynamic diameter
    8437 1432 MIL-53(Fe) 1 μm SEM The average
    8453 1454 MIL-47(V)-X TEM, SEM As shown in Figure S2 with different magnifications, the synthesized MOF particles are discrete with different sizes of 20–1000 nm.