Periodic

Materials
  • ALL
  • Enzyme-like Activity
  • ALL
  • Catalase
    ref material size size err size unit size type size_comment BET b nanozyme b 10n b unit specific act sa 10n sa unit comment
    7357 35 Cu5.4O USNPs 3.5-4.0 nm TEM The average hydrodynamic diameter of Cu5.4O USNPs was approximately 4.5 nm.
    7358 38 Pt@PCN222-Mn 200 nm TEM
    7359 39 Au@Rh‐ICG‐CM 95.6 3.6 nm DLS The mean diameter of Au@Rh nanoparticles is 95.6 ± 3.6 nm.
    7366 49 Lipo-OGzyme-AIE 122.5 nm TEM the mean diameter increased from 96.8 nm of Lipo-AIE to 122.5 nm of the Lipo-OGzyme-AIE
    7367 52 EPL-coated MnO2 nanosheets (EM) ~330.86 nm TEM the size of the MnO2 nanosheet was measured to be around 330.86 nm
    7430 138 Ru@CeO2 YSNs 78 nm DLS The hydrated particle size distribution indicates that the size of Ru@CeO2 YSNs were approximately 78 nm, 81.3
    7432 140 Fe3+/AMP CPs 100 nm TEM Under TEM an extended network structure composed of aggregated nanoparticles was observed (Fig. 1b), which should give a large surface area for reaction. The average feature size is about 100 nm (Fig. S1, Supporting Information).
    7443 155 Au NCs-ICG ~10 nm TEM After ICG loading, the hydrodynamic size of Au NCs-ICG nanozymes sequentially increased to ∼10 nm,
    7447 157 PEG/Ce-Bi@DMSN 3-4 nm TEM The TEM image of the CeO2 nanozymes presented in Figure 1d, shows that the CeO2 nanozymes were 3–4 nm in diameter and were suitable for loading into the large-pore channels of Bi2S3@ DMSN nanoparticles
    7448 157 Bi2S3@DMSN 110.6 18.6 nm TEM length
    7449 157 Bi2S3@DMSN 65.6 9.2 nm TEM width 201.32
    7508 230 HP-HIONs@PDA-PEG 526.24 48.89 nm TEM The diameter of the HP-HIONs@PDA-PEG was 526.24 ± 48.89 nm, as determined by TEM, corresponding to the results of DLS experiments (Fig. S1A, 588 ± 140.23 nm).
    7529 271 Co3O4 nanoflowers 360 20 nm TEM
    7563 321 PdNPs/GDY 3.1 nm TEM In contrast, many Pd nanoparticles, with an average size of 3.1 nm, were observed and uniformly distributed on the GDY sheet after reduction with NaBH4 (Fig. 1c and d, Fig. S2), demonstrating the successful preparation of the PdNPs/GDY composite.
    7565 324 Cu NCs 2.5 nm TEM The as-prepared Cu NCs were approximately 2.5 nm in diameter
    7656 424 m-SAP/cDNA 220.82 nm TEM As exhibited in Fig. 3C, the hydrodynamic diameters of m-SiO2 NP, MNP-aptamer and m-SAP/c-DNA are 201.09, 117.95, 220.82 nm, respectively. When MNP-aptamer and m-SAP/cDNA incubated and reacted, the m-SAP/MNP complex generated and showed a large size increase to 457.43 nm, implying the successful hybridization of aptamer and cDNA.
    7709 483 DMSN@AuPtCo 80 nm TEM The average particle diameter and central-radial pore size of DMSNs were around 80 nm and 11.5 nm respectively, which were found from scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images, and nitrogen adsorption measurements.AuPtCo clusters having a diameter of around 2.2 nm were formed by in situ reduction and attached to the pore surfaces, as clearly shown by SEM , TEM , elemental mapping images , powder X-ray diffraction analysis and diameter distribution analysis.
    7738 506 Fe–N4 pero-nanozysome 120 nm TEM the pero-nanozysome had a spherical morphology with hollow structure, and the average diameter was about 120 nm with a shell about 4–6nm thickness 6.0 ±0.9 U/mg POD
    7739 506 Fe–N4 pero-nanozysome 120 nm TEM the pero-nanozysome had a spherical morphology with hollow structure, and the average diameter was about 120 nm with a shell about 4–6nm thickness 0.027 ±0.002 U/mg UOD
    7735 506 Fe–N4 pero-nanozysome 120 nm TEM the pero-nanozysome had a spherical morphology with hollow structure, and the average diameter was about 120 nm with a shell about 4–6nm thickness 41.7 ± 7.9 U/mg CAT
    7736 506 Fe–N4 pero-nanozysome 120 nm TEM the pero-nanozysome had a spherical morphology with hollow structure, and the average diameter was about 120 nm with a shell about 4–6nm thickness U/mg
    7737 506 Fe–N4 pero-nanozysome 120 nm TEM the pero-nanozysome had a spherical morphology with hollow structure, and the average diameter was about 120 nm with a shell about 4–6nm thickness 1257.1 ±122.8 U/mg SOD
    7785 555 MnO2–Au 200 nm TEM a relatively smooth surface with uniformed size of about 200 nm (Fig. 1(a)).
    7817 591 TACN AuNPs 2 nm TEM We opted for spherical nanoparticles with a Au core smaller than 2 nm to have a nanoplatform size in the biomolecular scale and to minimize light absorption and scattering by the nanoparticles due to the surface plasmon band, whose intensity depends on the nanoparticle size.
    7823 597 PAAC TEM The free-standing Pd@Pt have average diameter of ~100 nm (Figure 2C). The two regions highlighted in gray indicate the ~20 nm thickness of the Pt shell, almost consistent with Figure 2D.
    7831 605 Ce-MOF
    7832 606 Pt NPs-PVP the average diameter of Pt NPs-PVP is about 3 nm, which is calculated by statistical analysis of hundreds of nanoparticles in TEM image. The average hydrodynamic diameter  of Pt NPs-PVP was around 4.5 nm (Fig. 1C) as measured by DLS.
    7838 614 PbS NPs@RGO/NiO NSAs ~16 nm TEM Fig. 1D showed the transmission electron microscopy (TEM) image of PbS NPs, which has a diameter about ~16 nm.
    7839 615 Pt-Ce6 71.5 nm TEM From the TEM image (Fig. 1a), the as-prepared Pt NPs exhibit spherical and porous morphology with a diameter of approximately 71.5 nm (Fig. S1a).
    7842 619 DFHHP The constructed HMS was ca. 100 nm in diameter (Fig. 1A and B). The average hydrodynamic particle diameters of HMS and DFHHP were ca. 150 nm with a narrow size distribution (Fig. 1E), indicating good dispersion of these nanomaterials in aqueous media.
    7849 627 supramolecular Amino acids 150 nm SEM & TEM
    7858 638 Fe3O4 32 nm TEM
    7869 653 MnO2 188 nm DLS Average
    7884 667 nanoceria 3 nm TEM Both TEM images and DLS (images in SI) indicated that the proposed synthetic approach yielded nanoparticles with an average size of 3 nm.
    8008 798 PtPdCu TNAs 36.43 4.32 nm TEM The diameter was calculated to be 36.43 ± 4.32 nm from 200 random cubic shape particles.
    8058 863 NER 125 nm DLS Its size and zeta potential were about 125 nm ( Supporting Information Figure S2, black curve) and −27.9 mV (Figure 1d, black curve), as measured by DLS.
    8060 865 Fe3O4@PPy MIPs 25-35 nm TEM
    8062 867 Fe3O4 8.3 nm TEM
    8063 868 RuO2 2 nm TEM the mean diameter of the RuO2NPs was ∼2 nm, and the hydrodynamic size of RuO2NPs was about 5.4 nm
    8074 879 MnO2-Silk Commercial micro-sized MnO2 (≥99.99% trace metals basis) particles from Sigma-Aldrich
    8079 884 NL-MnCaO2 nm TEM, SEM morphological studies of the prepared oxides were carried out using SEM and TEM. The SEM and TEM images are shown in Fig. 1C and 1D. These images represent aggregated nanoparticles and morphology similar to a crumpled paper.
    8087 895 BSA-MgNPs 6 nm TEM The particle size distribution pattern (Figure 1A, inset) revealed that the major population of particles is in the range of 4−8 nm size with an average size distribution of 6.0 nm. 6.53 m2 g−1
    8090 898 ZnO2/CA-βCD nm SEM Fig. 4 SEM images (Mag. 10kx) and particle size distribution histograms of a ZnO2 and b ZnO2/CA-β-CD
    8096 904 Niosome-MnO-DTPA-PP(IX) 78.33 19.59 nm DLS 78.33 19.59 for Niosome-MnO-DTPA-PP(IX) as shown in Figure 2 and Table 1.
    8102 910 hollow mesoporous silica nanosphere-supported nanosized platinum oxide 150 nm TEM The TEM images of PtOx@MMT-2 (Fig. 1b and c) revealed that MMT-2 were ~150 nm in size and that PtOx NPs with dark image contrast were well dispersed in the thin mesoporous silica shell
    8109 917 BSA-MnO2/IR820@OCNC 100 nm TEM Transmission electron microscopy (TEM) was used to confirm the structures of the various nanomaterials. The CNCs appeared as hollow nanoscale structures, which explains their high loading capacity (Fig. 1B). Furthermore, significant particle aggregation was observed in the TEM image; this was attributed to their poor hydrophilicity. BSA-MnO2 nanoparticles were generally spherical and well dispersed, with a uniform particle size (Fig. 1C). After attaching abundant carboxyl groups to the surface of the CNCs, loading with IR820, and decorating with BSA-MnO2, the BMIOC nanosystem was successfully obtained (Fig. 1D and E).
    8125 1062 MnO2 Fenozymes TEM Transmission electron microscopy (TEM) revealed the uniform diameter of the hollow structure of FTn was ≈12 nm after protein negative staining (Figure 1b). The diameter of FTn inner cavity is 8 nm, and the incorporated MnO2 nanozymes within the FTn core (MnO2 Fenozymes) were observed by TEM. The MnO2 Fenozymes showed monodispersed spherical morphology (Figure 1c) with mean diameters of ≈6.5 nm, which did not change after TPP conjugation (Figure 1d).
    8156 1090 CeO2 2、10 nm TEM TEM images (Figure S1) reveal the presence of well-defined nearly monodisperse nanoparticles with average sizes of 2 and 10 nm, respectively.
    8203 1155 Au25 2 nm DLS The hydrodynamic size of Au25 is determined to be 2.0 nm by dynamic light scattering (DLS), and the zeta potentials of all clusterzymes are around −35 mV, suggesting the ultrasmall size and good colloid stability (Supplementary Fig. 1).
    8238 1206 Cu–Ru/LIG 50-500 nm SEM The Cu–Ru NPs appeared as polyhedral of varying sizes (50–500 nm in dia.) which has been randomly distributed over the surface of LIG. The polyhedral shape shows high reactive surfaces which exhibit much higher catalytic activity than the other shapes.
    8264 1245 CeO2 80-200 nm TEM The particle size distributions and potentials of the nanovesicles are presented in Figure 2I,J, respectively. The DLS analysis indicated that the nanovesicles ranged between 80 and 200 nm in size
    8266 1249 Fe3O4 200 nm TEM Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) demonstrated that the asprepared Fe3O4 nanozymes with PEG modification have a rough surface with a diameter size of 200 nm (Figure S1).
    8320 1311 Metal oxide into the glass composition 250 μm Others diameter lower than 250 μm
    8322 1312 PDA-coated Hb 7 nm DLS Size
    8321 1312 Hb 5.2 nm DLS Size
    8323 1313 Hollow manganese silicate (HMnOSi) 15 nm TEM